With high power LED the engineering technology, high power LED used increasingly more widely fan, high power LED wall lamp is one of wash application, we take the wall lamp LED wash details:
Wash wall lamp originated in English wash wall, translated into Chinese became wash wall lamp. Wall lamp and that LED to wash linear LED project-light lamp and so on, because its shape is elongated, also some people to call that LED line lamp, is primarily used for building decoration lighting with, and employeed to outline the outline of large buildings, the technical parameters and LED project-light lamp broadly similar, relative to LED project-light lamp round structure, LED to wash the structure of wall lamp bar radiator appear more good deal if we do.
A: LED wall lamp was the basic parameters
Wall lamp and fence LED wash tube has lots of similarities, let us come to its parameters are introduced:
Wash you can of the voltage Led lights for 220 V and 110 V, 36 V, 24 V, 12 V, several, and then we are choosing power supply
Time likely pay attention for the corresponding current.
2) working temperature:
Because wall lamp normally used in washing outdoor is more, so this parameter may appear far more important, to the requirements within the temperature is high, standard situation we request in the outdoor temperature in 40 + 60 -can get the job done. But wall lamp is used to heat better aluminum shell, so the advantages of general wall lamp can wash meet the criteria.
3) LED lamp bead number:
General wash the regarding wall lamp LED 9/300 mm, 18/600 mm, 27/900 mm, 36/1000 mm, 36/1200 mm.
4) protection level:
This is actually by wash the important parameters belonging to the wall lamp, also affect current guardrail tube quality important indexes, we must carry on strict request, we in the outdoor use, requirements in waterproof level above IP65 are most effective. Also require a related voltage, possible to deal with disintegrate, high and low temperature resistance, resistance to burn, impact resistance aging level
5) control mode
Wall lamp is Took wash have actually two regarding control ways: internal control and external control two kinds. Internal control is not an external controller, design personnel manage system design in the wall lamp 'inside, the extent within the effect is can't rethink. External control is external controller. Its effect may be the main control buttons may change and the whole effect. Usually in large engineering above, the customer requirements may alter his effect, we use external control this structure. There are also many washes directly support the wall DMX512 control strategy.
6) color specification:
Two sections, section 6, 4 section 8 period, full-color color, colorful color, red, yellow, green, blue, purple, white color
7) light Angle: the lighting Angle usually have narrow (20 degrees or so), (50 degrees or so), wide (around 120 degrees) three, at present, high power LED wash wall lamp (narrow Angle) the farthest distance projection for the effective 20 to 50 meters;