Floor Lamp Speaker Mount

by:Merttace     2019-11-17
I found these cheap small satellite speakers for my home theater, but since I\'m not sure about their sound, I don\'t want to fix them permanently on the wall.
My goal is to put them in a better position without filling our living room with speaker holders or holes in the wall.
My cheap solution is to hang them on our floor lamp.
This structure can be done by hand.
Tools: Materials: pipe fasteners (
And floor lamp tube)
The diameter is different, but the measurement is optional.
The pipe fasteners I found have M8 (8 mm)and M10 (10 mm)
In their thread.
I decided to use the M8 thread as it would probably be safer to go further in the hole.
In addition, the M8 rod is easier to work.
Next, measure how long it takes to hang the speaker.
The best length is just comfortable enough.
After measurement, cut as many parts as you need.
I need four or two for each speaker.
The hole on the speaker is the key hole-
The shape with a diameter of about 5 or 10mm, the wider part is about 6mm, and the narrower part.
So I need more adjustments to my work.
I removed some lines with my hacksaw.
Adjust the width with the file.
After that, I had four like the one in the picture.
The few lines I left will hold the speakers in place.
Try to find a good height for your speakers and connect the pipe fasteners to the tube.
After the member is in place, adjust the distance to fit the speaker hole.
Both fasteners should have the weight of the speaker.
I decided to add another pipe fastener under two speakers to make sure they don\'t turn in the unwanted direction.
The total cost of this project is less than 10 euros.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...